GIS-R80

This guide will walk you through the initial installation and connection to your Guest Internet unit so that you can connect to the admin interface.

Your GIS-R80 unit: GIS-R80 The necessary cables to setup your unit: cable

Connection Steps

  1. Connect an Ethernet cable on the WAN port to your router

  2. Power on the GIS-R80 by connecting the power supply provided

  3. Wait 30 seconds for the GIS unit to complete the boot process

  4. Connect an Ethernet cable on the LAN port and connect the other end to your computer/AP

GIS-R80 setup

admin interface

If you run into any issue with the installation of your unit please contact us.

If you need to Reset to Factory Defaults please click here